Pneumatic Knife Gate Valve Introduction：

Pneumatic knife gate valve is one of the important varieties of the production process control valve. Equipped with a solenoid valve to complete the switch control, with electrical valve positioner can also be completed to adjust the control. Users can match the actual needs. The main cast steel, stainless steel and so on. It is particularly suitable for the paper industry, chemical industry,coal, sewage, sugar and other industries.

Pneumatic Knife Gate Valve Advantage：

1, the overall design of the valve, fluid resistance, flexible and convenient operation.

2, manual knife gate valve screw drive with double plane bearing design, making the transmission friction greatly reduced, so the valve open light and smooth.

3, the knife valve seal seat with a movable seal, and the use of 0-ring preload to provide pre-tightening the seal seat close to the valve, the amount of leakage greatly reduced on the long-term use of seal wear automatic compensation function to improve The service life.

4, fixed guide claws, no groove design, not easy to cause media accumulation or jamming.

5, The valve seat can choose metal hard seal or soft seal according to the requirement of medium and working conditions: The gate adopts the chrome plating or ion nitriding on the surface to make the gate more wear-resistant and the service life of the sealing surface is longer; the soft sealing is optional PTFE seat or reinforced PTFE seat or EPDM, NBR, good sealing, corrosion-resistant.

6, the media to adapt to a wide range: good sealing performance and economic practicality, operation can be manual, pneumatic, electric, practical range is very wide.

Pneumatic Knife Gate Valve Executive Standard:

Model: PZ673H

Nominal diameter: DN50 ~ 1200mm

Nominal pressure: PN0.6 ~ 1.6MPa

Working temperature: -20 ~ 80 °C

Body material: Carbon steel, stainless steel P4, P6

Design standards: API 600, API6D, ASME B16.34, GB/ T 12234

Construction Length: ASME B16.10, API6D, GB / T 12221

Connection Standards: ASME B16.5, ASME B16.47. GB/ T 9113, JB /T79,T20592

Pressure test: API 598, GB/ T 13927,JB / T 9092

Pressure - Temperature class: ASME B16.34, GB / T 12224

Pneumatic Knife Gate Valve Adaptations：

Knife-type pneumatic gate valve is an important industrial automation and control system executive body, remote control can be centralized to meet the needs of computer-controlled; now in the petrochemical industry, gas equipment, nuclear industry, power equipment, environmental water treatment, HVAC, steel Metallurgy, industrial furnaces, canning equipment, brewing equipment, drying equipment, vacuum equipment, surface treatment, biopharmaceuticals, food machinery, textile printing and dyeing, papermaking and other industries are widely used, but also the national defense construction, construction of science and technology of choice.

Pneumatic Knife Gate Valve Specification:

The above specifications are only for reference and subject to change without prior notice, please confirm with our sales representative when making order.