Multi-stage Centrifugal Blower Advantage:
• Designed for optimum performance at 50 Hz drive speeds
• Direct coupled motor
• More than 8% higher efficiency
• Higher pressure capability
• Quiet: no gear box needed
• Small footprint
•Bearing life of 10 years or more
• Constructed of cast iron with a carbon steel shaft and aluminum impellers

Main technical specifications of C series products:

Inlet flow rate: 15-1500m³/min

Outlet pressure: 1000-12000mmH2O

Environmental temperature: -35~+40ºC

Relative humidity: 20~85%

Noise: ≤84dB(A)

Bearing seat vibration value: vibration speed ≤4.0mm/s
Multi-stage Centrifugal Blower Applications:
Designed to handle air or gas, our blowers are used in the following applications

Water treatment

Waste water treatment

Combustion air

Central vacuum cleaning

Fluidization and homogenization of silos

Liquids or baths aeration and agitation

Air knife drying

Galvanizing process

Gas compression for chemical and petrochemical industries

Pulp and paper, printing industries

Multi-stage Centrifugal Blower Specification:

The above specifications are only for reference and subject to change without prior notice, please confirm with our sales representative when making order.